Interfold Pleated Disposable filters are economical, industrial standard for disposable pre or primary filters in all airconditioning systems. The greater extended surface allows higher dust holding capacity and extends replacement intervals compared to flat panel filters. They are factory permenantly ES charged synthetic media for higher efficiency and lower pressure drop for long lifespan.
Polyester,Polypropylene Pleated Media
Corrosion-Resistant Expanded Mesh
Moisture-Resistant Kraft Board
with option for Gi, Al or SS frame (SS304 or SS316 frame only)
Standard Nominal Thickness: 1", 2", 4"
Standard Nominal Sizes: 24x24, 12x24, 20x24,
Other Avaialble Sizes: 20x20, 16x24, 16x20, 20x25, 16x25, Custom Sizes
FC Frame sizes can be customised for use in Fan Coil Units (FCU) and Fresh Air Supply filters (FAF). The filter media is replaceable for FC frames. Fibreglass Media is suitable for use as pre filters in oil mist, ink, paint arrestor applications. Impregnated Carbon synthetic media can be used for odour control.
Aluminium or Stainless Steel Mesh and Baffle Filters are traditionally used as washable pre-filters. Nowadays, they are used for Grease/ Oil Mist arrestance in kitchen hoods, also known as grease filters or refrigeration equipment. The Al or SS design mesh or baffle filters are non-flammable and can be classified as Class 1 Filters used as high as 250degC. They can be resued by washing in mild detergent solutions.
Aluminium (Al) or Stainless Steel SS304 Mesh and FrameSand, Grease, Oil Mist, Coarse Dust Pre-filtration Removal
ES65 IF MERV11, ES13 IF MERV13, ES14 IF MERV14 Pleated Disposable
ES Electrostatic Pleated disposable filters are made with 100% synthetic needle punched and electrostatically charged media during media manufacturing. The permanent electrostatic charged filter has a tremendous increase efficiency up to >65%@1-3um (MERV11) ,>85%@1-3um (MERV13) and >90%@1-3um (MERV14) in the range of particles size of 1-3um at rated velocity used for AHU, PAU and FCU.
Model: ES65 IF, MERV11/11A >65%@1-3um
Model: ES13 IF, MERV13/12A >85%@1-3um
Model: ES14 IF, MERV14/13A >90%@1-3um
Available in 3mm thick disposable media pads for Split units, FCU or FAF
Pleated Disposable, Filter Thickness: 1", 2" and 4" thickness
Standard sizes 24x24", 12x24" , 20x24"
Other sizes availabile: 20x20", 16x20", 16x24", 12x20" and custom sizes is feasible.
IP20 Pocket Washable G4 25-35% MERV7 ISO Coarse 65%
IP20 Pocket Washable are used as primary for prefilters. They are low efficiency prefilters for high face velocities, high coarse dust loading and long service life. Used in automotive plants, spray paint booths and gas turbines, dust collectors, aircon filtration in AHU PAU or FAF for long life.
Synthetic Washable Polyester media for light wash and dedust of large particles
Ultrasonic welded pocket bag ends and between for separation and rigidity and better air pass
Enclosing Galvanised steel frame with internal support wire rods
High Dust Loading and service life
Standard Sizes 595x595mm 4p to 8p, 289x595mm-3p,4p, Customisable sizes with various pockets
Baffle Aluminium or Stainless Steel 304
